my reliance netconnect works better from the railway station than from my home
speeds when tested from my room: http://rajanikaruturi.info/my-reliance-netconnect-broadband-device-just
Filed under
reliance-netconnect
How to configure reliance netconnect broadband + on ubuntu 10.04 Lucid Lynx
install the packages usb-modswitch usb-modswitch-data
Add this to /etc/wvdial.conf
[Modem0]
Modem = /dev/ttyUSB0
Baud = 115200
SetVolume = 0
Dial Command = ATDT
Init1 = ATZ
FlowControl = Hardware (CRTSCTS)
[Dialer netconnect]
Username = your device phone number
Password = password usually the device phone number
Phone = #777
Stupid Mode = 1
Inherits = Modem0
do # sudo reboot
now do # sudo wvdial netconnect
It will dial and give you the ip address if successfully connected. Press CTRL+C to disconnect ( network manager may not detect it)
Comments [1]
my reliance netconnect broadband+ device just got activated. so far good
speed is good in the day time
Its very slow after 22:00 hrs.. will post the speeds at that time as well..
Filed under //
reliance-netconnect
Comments [0]
Comments [0]